| | |
|
| |
| | |
|
|
Variator Kit, Dr. Pulley for 250cc CFMoto, Kymco Scooters, Go Karts
Dr. Pulley Variator Kit (23mm x 18mm) for CFMoto, Roketa 250, CFMoto V3 / V5 250
SPECIFICATIONS:
- Includes Instructions
- Includes Sliders
- Does Not Included Roller Weights
- Number of Splines: 21
- Drive Face Outer Diameter (A): 128mm
- Boss Inner Diameter (C): 17mm
- Boss Outer Diameter (B): 27mm
- Ramp Plate Inner Diameter (D): 17mm
- Fan Inner Diameter Peak to Peak (H): 15mm
- Fan Inner Diameter Valley to Valley (G): 16.5mm
COMPATIBILITY:
- CFMoto V3, V5
- Hammerhead 250 Go Karts
- Joyner Go Kart 250
- Kymco People 250, Bet & Win 250, Xciting 250, Dink 250
- Chinese Honda Cloned 172mm Engines
This performance Dr. Pulley Variator (front clutch assembly) is specifically made for CF Moto 250cc with HI/LOW transmission engine. Therefore, this clutch only works for the GTS 250 or SS 250 or any other 250s on the market with hi/low transmission.
Variator Outer diameter: 138mm Number of Fan plate teeth: 21
The steep angle ramp plates in the Dr Pulley variators allow for faster and smoother engagement at all speeds, and allow lighter weighted sliders to fully extend to make the most of your CVT system.
The Dr. Pulley variator comes with the variator, fan plate, and center dowel pin. Rollers or sliders not included.
**MADE IN TAIWAN**
**NOTE: Electrical, High Performance, Aftermarket items are non-returnable so please check photos and specifications before ordering.
Please see our Warranty and Returns Policy
Item Number:
169264
Manufacturer:
Dr. Pulley
Manufacturer Part #:
231801
List Price: $299.99
Sale Price: $269.99
* Whole number only
153mm
|
List Price: $59.99
Sale Price: From $39.99 to $44.99
23mm x 18mm
| |
|
|